Update the camera firmware before updating the auto distortion control data to version L:2.000 or later.
You will not need to download or install this update if the firmware listed above is already installed. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version.
Once the upgrade is complete, turn off the camera and remove the memory card. After that, select “Firmware version” and then follow the instructions displayed to upgrade the firmware. Insert the memory card to the camera’s memory card slot and then turn on the camera. Next, copy the D3100_0102.bin file to the root of a formatted memory card. Next, copy the setup file or the firmware upgrade you downloaded to this folder you created.ĭouble-click on the setup file or firmware upgrade to create a folder named D3100Update which contains the D3100_0102.bin file. First, create a folder in your hard drive with an appropriate name. Before proceeding with the update, power the camera using the AC adapter or use a fully charged battery.
Here are the steps how to update the firmware once you have downloaded the firmware upgrade. Take note, you need to check Accept before you can actually download the firmware upgrade. Once downloaded, you can begin with the upgrade. Download the firmware upgrade from Nikon D3100 Firmware. To update the firmware, you need to download first the firmware upgrade. But if it is the stock firmware or the original firmware, you can proceed with the update. If the latest version is already installed, you don’t need to further update your camera.
It should display the camera’s firmware version.Īfter that, turn off the camera. Select Setup and then “Firmware version”. To do this, turn on the camera and then press Menu. Before proceeding with the update, you should check first the current firmware version. The latest firmware update for the Nikon D3100 camera upgrades the A firmware to ver.1.02 and B firmware to ver.1.01. Updating the firmware of your Nikon D3100 camera is very easy.